0.4.3

1 files changed, 166 insertions, 0 deletions

diff --git a/m4/find_apr.m4 b/m4/find_apr.m4
new file mode 100644
index 0000000..9228c76
--- /dev/null
+++ b/m4/find_apr.m4
@@ -0,0 +1,166 @@
+dnl -------------------------------------------------------- -*- autoconf -*-
+dnl Copyright 2000-2005 The Apache Software Foundation
+dnl
+dnl Licensed under the Apache License, Version 2.0 (the "License");
+dnl you may not use this file except in compliance with the License.
+dnl You may obtain a copy of the License at
+dnl
+dnl     http://www.apache.org/licenses/LICENSE-2.0
+dnl
+dnl Unless required by applicable law or agreed to in writing, software
+dnl distributed under the License is distributed on an "AS IS" BASIS,
+dnl WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+dnl See the License for the specific language governing permissions and
+dnl limitations under the License.
+
+dnl
+dnl find_apr.m4 : locate the APR include files and libraries
+dnl
+dnl This macro file can be used by applications to find and use the APR
+dnl library. It provides a standardized mechanism for using APR. It supports
+dnl embedding APR into the application source, or locating an installed
+dnl copy of APR.
+dnl
+dnl APR_FIND_APR(srcdir, builddir, implicit-install-check, acceptable-majors)
+dnl
+dnl   where srcdir is the location of the bundled APR source directory, or
+dnl   empty if source is not bundled.
+dnl
+dnl   where builddir is the location where the bundled APR will will be built,
+dnl   or empty if the build will occur in the srcdir.
+dnl
+dnl   where implicit-install-check set to 1 indicates if there is no
+dnl   --with-apr option specified, we will look for installed copies.
+dnl
+dnl   where acceptable-majors is a space separated list of acceptable major
+dnl   version numbers. Often only a single major version will be acceptable.
+dnl   If multiple versions are specified, and --with-apr=PREFIX or the
+dnl   implicit installed search are used, then the first (leftmost) version
+dnl   in the list that is found will be used.  Currently defaults to [0 1].
+dnl
+dnl Sets the following variables on exit:
+dnl
+dnl   apr_found : "yes", "no", "reconfig"
+dnl
+dnl   apr_config : If the apr-config tool exists, this refers to it. If
+dnl                apr_found is "reconfig", then the bundled directory
+dnl                should be reconfigured *before* using apr_config.
+dnl
+dnl Note: this macro file assumes that apr-config has been installed; it
+dnl       is normally considered a required part of an APR installation.
+dnl
+dnl If a bundled source directory is available and needs to be (re)configured,
+dnl then apr_found is set to "reconfig". The caller should reconfigure the
+dnl (passed-in) source directory, placing the result in the build directory,
+dnl as appropriate.
+dnl
+dnl If apr_found is "yes" or "reconfig", then the caller should use the
+dnl value of apr_config to fetch any necessary build/link information.
+dnl
+
+AC_DEFUN([APR_FIND_APR], [
+  apr_found="no"
+
+  if test "$ac_cv_emxos2" = "yes"; then
+    # Scripts don't pass test -x on OS/2
+    TEST_X="test -f"
+  else
+    TEST_X="test -x"
+  fi
+
+  ifelse([$4], [], [
+         ifdef(AC_WARNING,AC_WARNING([$0: missing argument 4 (acceptable-majors): Defaulting to APR 0.x then APR 1.x]))
+         acceptable_majors="0 1"],
+         [acceptable_majors="$4"])
+
+  apr_temp_acceptable_apr_config=""
+  for apr_temp_major in $acceptable_majors
+  do
+    case $apr_temp_major in
+      0)
+      apr_temp_acceptable_apr_config="$apr_temp_acceptable_apr_config apr-config"
+      ;;
+      *)
+      apr_temp_acceptable_apr_config="$apr_temp_acceptable_apr_config apr-$apr_temp_major-config"
+      ;;
+    esac
+  done
+
+  AC_MSG_CHECKING(for APR)
+  AC_ARG_WITH(apr,
+  [  --with-apr=PATH         prefix for installed APR, path to APR build tree,
+                          or the full path to apr-config],
+  [
+    if test "$withval" = "no" || test "$withval" = "yes"; then
+      AC_MSG_ERROR([--with-apr requires a directory or file to be provided])
+    fi
+
+    for apr_temp_apr_config_file in $apr_temp_acceptable_apr_config
+    do
+      for lookdir in "$withval/bin" "$withval"
+      do
+        if $TEST_X "$lookdir/$apr_temp_apr_config_file"; then
+          apr_found="yes"
+          apr_config="$lookdir/$apr_temp_apr_config_file"
+          break 2
+        fi
+      done
+    done
+
+    if test "$apr_found" != "yes" && $TEST_X "$withval" && $withval --help > /dev/null 2>&1 ; then
+      apr_found="yes"
+      apr_config="$withval"
+    fi
+
+    dnl if --with-apr is used, it is a fatal error for its argument
+    dnl to be invalid
+    if test "$apr_found" != "yes"; then
+      AC_MSG_ERROR([the --with-apr parameter is incorrect. It must specify an install prefix, a build directory, or an apr-config file.])
+    fi
+  ],[
+    dnl If we allow installed copies, check those before using bundled copy.
+    if test -n "$3" && test "$3" = "1"; then
+      for apr_temp_apr_config_file in $apr_temp_acceptable_apr_config
+      do
+        if $apr_temp_apr_config_file --help > /dev/null 2>&1 ; then
+          apr_found="yes"
+          apr_config="$apr_temp_apr_config_file"
+          break
+        else
+          dnl look in some standard places
+          for lookdir in /usr /usr/local /usr/local/apr /opt/apr /usr/local/apache2; do
+            if $TEST_X "$lookdir/bin/$apr_temp_apr_config_file"; then
+              apr_found="yes"
+              apr_config="$lookdir/bin/$apr_temp_apr_config_file"
+              break 2
+            fi
+          done
+        fi
+      done
+    fi
+    dnl if we have not found anything yet and have bundled source, use that
+    if test "$apr_found" = "no" && test -d "$1"; then
+      apr_temp_abs_srcdir="`cd $1 && pwd`"
+      apr_found="reconfig"
+      apr_bundled_major="`sed -n '/#define.*APR_MAJOR_VERSION/s/^[^0-9]*\([0-9]*\).*$/\1/p' \"$1/include/apr_version.h\"`"
+      case $apr_bundled_major in
+        "")
+          AC_MSG_ERROR([failed to find major version of bundled APR])
+        ;;
+        0)
+          apr_temp_apr_config_file="apr-config"
+        ;;
+        *)
+          apr_temp_apr_config_file="apr-$apr_bundled_major-config"
+        ;;
+      esac
+      if test -n "$2"; then
+        apr_config="$2/$apr_temp_apr_config_file"
+      else
+        apr_config="$1/$apr_temp_apr_config_file"
+      fi
+    fi
+  ])
+
+  AC_MSG_RESULT($apr_found)
+])