Changes on the way to 1.19. This is probably going to be 1.19b1. Detail:1.19b1

* Hostnames are now converted to lowercase in the mass-virtual naming section.
  The loop that converts dots to underscores has been optimized as well.
* Migration to autoconf
* New directive LogSQLTableType allows one to specify the kind of table that
  the module makes during table creation (e.g. InnoDB, MyISAM).  Thanks to Jim
  Turner for the suggestion and patch.  If your MySQL server does not support
  the specified type, it will create a MyISAM table instead.
* Directives can now be placed in the 'main' server config and will be
  inherited by the virtual hosts.  This means a LOT less repetition: you only
  specify the item once to have it inherited, but it can still be overridden
  on a virtualhost level.

1 files changed, 251 insertions, 0 deletions

diff --git a/install-sh b/install-sh
new file mode 100755
index 0000000..e9de238
--- /dev/null
+++ b/install-sh
@@ -0,0 +1,251 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+        -c) instcmd="$cpprog"
+            shift
+            continue;;
+
+        -d) dir_arg=true
+            shift
+            continue;;
+
+        -m) chmodcmd="$chmodprog $2"
+            shift
+            shift
+            continue;;
+
+        -o) chowncmd="$chownprog $2"
+            shift
+            shift
+            continue;;
+
+        -g) chgrpcmd="$chgrpprog $2"
+            shift
+            shift
+            continue;;
+
+        -s) stripcmd="$stripprog"
+            shift
+            continue;;
+
+        -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+            shift
+            continue;;
+
+        -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+            shift
+            continue;;
+
+        *)  if [ x"$src" = x ]
+            then
+                src=$1
+            else
+                # this colon is to work around a 386BSD /bin/sh bug
+                :
+                dst=$1
+            fi
+            shift
+            continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+        echo "install:  no input file specified"
+        exit 1
+else
+        true
+fi
+
+if [ x"$dir_arg" != x ]; then
+        dst=$src
+        src=""
+        
+        if [ -d $dst ]; then
+                instcmd=:
+                chmodcmd=""
+        else
+                instcmd=mkdir
+        fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+        if [ -f $src -o -d $src ]
+        then
+                true
+        else
+                echo "install:  $src does not exist"
+                exit 1
+        fi
+        
+        if [ x"$dst" = x ]
+        then
+                echo "install:  no destination specified"
+                exit 1
+        else
+                true
+        fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+        if [ -d $dst ]
+        then
+                dst="$dst"/`basename $src`
+        else
+                true
+        fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='    
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+        pathcomp="${pathcomp}${1}"
+        shift
+
+        if [ ! -d "${pathcomp}" ] ;
+        then
+                $mkdirprog "${pathcomp}"
+        else
+                true
+        fi
+
+        pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+        $doit $instcmd $dst &&
+
+        if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+        if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+        if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+        if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+        if [ x"$transformarg" = x ] 
+        then
+                dstfile=`basename $dst`
+        else
+                dstfile=`basename $dst $transformbasename | 
+                        sed $transformarg`$transformbasename
+        fi
+
+# don't allow the sed command to completely eliminate the filename
+
+        if [ x"$dstfile" = x ] 
+        then
+                dstfile=`basename $dst`
+        else
+                true
+        fi
+
+# Make a temp file name in the proper directory.
+
+        dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+        $doit $instcmd $src $dsttmp &&
+
+        trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+        if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+        if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+        if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+        if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+        $doit $rmcmd -f $dstdir/$dstfile &&
+        $doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0